|
|
|||||||||
|
|||||||||
|
|||||||||
| |
||
| ||||||||||||||||||||||||||
![]() |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Display Modes |
|
|||
|
LOL THX with the help of alot of fans, i can go higher but when something is rendering the memory makes noices lol, same thing when i scroll on pages
__________________
Asus P4P800 2.4C @ 3.0Ghz 512MB PC 2700 Generic 2x SATA Hitachi Deskstar RAID 0 Sapphire 9800 Pro ->9800XT 411/375 |
|
||||
|
Good Job. I recommend the tagan TG480-U01. 480!! Its crazy, but you will find that if you go for the best in the range you will get far more accessories. Almost all the things that I have with mine are not included with the obsolete models. You will probably have others on your mind though. Have you seen the acryan site. They have pre-modded supply's, look nice...
|
|
||||
|
I had alot of powerfailure with the video card. Power would decrease, stability would drop by 75%.
Finally decided to separate all the shit inside, fan would be on a set of cable, drive on another set of power cable. Stability improved, dramatically. Though I still get prower decrease at times (rare now) How much is that PSU? Know any other ones? Looking for a mid range, nothing special. |
|
||||
|
128MB 256bit Xpertvision 9800SE with R350 Core flashed to 128MB 9800XT; Enabled 8 pipes with RivaTuner and clocked at 450Mhz/378Mhz on stock cooling; does up to 459Mhz/387Mhz but artifacts after around 10 minutes;
__________________
Quote:
|
|
||||
|
umm...i think 378*4/338*2 but ive used the xt bios for ages so i dun remember and thats like 411*4/364*2; one problem is whenever i install drivers i have to go thru device manager and select 9800xt manually as the setup does not know wtf is a 4 piped xt cause i dun enable the 8 pipes until after the installation;
|
![]() |
| Viewing: Dev Hardware Forums > OVERCLOCKING > Video Card Overclocking > Overclocking scores |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
|
|
|