
October 26th, 2007, 06:58 AM
|
|
|
|
Zebra Printer + Tiny Term (Printer Spooling)
Operating System is " Windows 2000"
Ok Im having trouble with printer spooling I think I have a Zebra S600 Printer and trying to print a RAW file (See Quote Below) to the printer from Tiny Term.
The printer is attached to the LPT1: port and when I try printing a test page it prints out there and then (no Spool) but when using tiny term it ment to print to a spool but thats where the problem starts... I print one lable and the printer waits about 4:11 min till it prints off or if I print anouther lable it pushes the first one and then waits anouther 4:11 min to print the secound label, unless I close Tiny term then it prints as soon as the programe closes.
Tiny term only sends RAW data to the LPT1: port the only options are to flush the buffer but if I do this it only prints off half the lable, and its the bottom part of the label not the top half???
Data from Database
* = Numbers
# = Letters
Quote:
^XA^FS
^FW#^PQ*^FS
^FX #### ### ####### ^FS
^FT***,***^CF#**,**^FD#### ###^FS
^FT***,****^FD##^FS
^FT**,***^FD#######^FS
^FT***,****^GB,***,*^FS
^FT***,****^GB,***,*^FS
^FT***,**^CF#^FD##:########## ^FS
^FT***,**^CF#^FD** ########## ^FS
^FT***,**^FD########## ^FS
^FT***,**^FD########## ^FS
^FT***,**^FD########## ^FS
^FT***,**^FD##* *## ^FS
^FT^CF#^FS
^FT***,**^FD### ### ##: ****** #### ### ##:##***** ^FS
^FT***,**^FD ^FS
^FT***,**^FD ^FS
^FT***,**^CF#^FD#/## ******** ### **^FS
^FT**,**^CF#^FD#####-###### ###, #########, ##### ##** *##^FS
^FT**,**^CF*^FD ######### ***** ****** ### ***** ******^FS
^FX ##### #### ^FS
^FT***,**
^GB*,***,*^FS
^FX ###### #### ^FS
^FT***,**
^GB*,***,*^FS
^FX ####### ### ^FS
^FT*,*
^GB***,****,*^FS
^FX #### ### ### ^FS
^FT*,****
^GB***,***,**^FS
^XZ |
We have 2 other PC running windows 98 with no problems and are using Tiny Term and same script.
P.S I have also tryed setting the Parelell port to EEP and ECP and still no luck in printing to spool...
|