|
|||||||||
|
|||||||||
|
|||||||||
 |
|||||||||
| |
||
|
|
|
|
|||||||||
|
|||||||||
|
|||||||||
|
|||||||||
| |
||
|
|
|
| |||||||||
 |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Display Modes |
Dev Hardware Forums Sponsor:
|
|
|
September 14th, 2004, 08:34 AM
|
|||
|
|||
|
Help determine cables on a ps/2 keyboard!
Hi!
I have a keyboard that I am soldering a special DSUB 9pool connector to. I know where the voltage, data, clock and ground should be soldered on the DSUB (which pins) But I have no clue which cable is which on the keyboard. I have a red,green,yellow and white cable. Can anyone help me out pleas? Many thanks!! 
|
|
September 14th, 2004, 12:12 PM
|
|||
|
|||
|
Did the keyboard have a connector on it to begin with? Your best bet may be to open the keyboard up and see if you can determin the pins from the PCB... voltage and ground should be easy to spot, most likely they will be red and green, respectively.
__________________
Yes, it is very possible, in fact, highly probable, that you are wrong. You would be a better person if you would just admit that. And I would be less annoyed.  "I like doggies....and apparently dinousaurs, mostly because they eat cats!" --Nilpo
|
|
| Viewing: Dev Hardware Forums > HARDWARE > Hardware Development > Help determine cables on a ps/2 keyboard! |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
 |
|
|
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Linear Mode
