Guys i need help to OC my Q9550 2,83 GHZ to 3,2/3,4 GHZ.
I'm quit new in the OC world!
I tried to put my FSB to 1400. But next i can't get into vista or i get into and then it slow down from 2,83 to 1,73GHZ... help? Got the striker 2 extreme board.
Someone help me please!
BIOS V6.0 PG settings:
My settings are:
CPU Level Up: Auto
Memory Level Up: Auto
AI Overclock Tuner: Manual
x Overclock Options: Disavled (gray)
CPU Multiplier: 8.5
FSB - Memory Clock Mode: Unlinked
x FSB - Memory Ratio: Auto (gray)
FSB (QDR), MHz: 1400
Actual FSB (QDR): 1400.0 (gray)
Mem (DDR), MHz: 1066
Actual MEM (DDR) MHz: 1050.0 (gray)
LDT Frequency: 5x
PCIE Bus, Slot 1 &2, MHz: 100
PCIE Bus, Slot 3, MHz: 100
SPP <->MCP Ref Clock, MHz: Auto
x SLI-Ready Memory: Disabled (gray)
Memory Timing Setting (no changes)
Over Voltage:
My Settings:
CPU Voltage: 1.30000V
Loadline Calibration: Disabled
CPU PLL Voltage: 1.50V
CPU VTT Voltage: 1.30V
Memory Voltage: Auto
NB Core Voltage: 1.46V
SB Core Voltage: Auto
CPU GTL_REF0 Ratio: Auto
CPU GTL_REF1 Ratio: Auto
CPU GTL_REF2 Ratio: Auto
CPU GTL_REF3 Ratio: Auto
CPU GTL_REF4 Ratio: Auto
NB GTL_REF Ratio: Auto
DDR3 CHA1 Ref Voltage: Auto
DDR3 CHB1 Ref Voltage: Auto
DDR3 CHA2 Ref Voltage: Auto
DDR3 CHB2 Ref Voltage: Auto
CPU Configuration:
My Settings:
CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanched C1 (C1E): Disabled
Execute Disable Bit: Enabled
Virtualization Technology: Enabled
Enchanced Intel Speedstem(tm) Tech. Disabled
CPU Core 2 Enabled
CPU Core 3 Enabled
CPU Core 4 Enabled
Spread Spectrum Control
My Settings:
x CPU Spread Spectrum: Disabled (gray)
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled
-------------------------------------------------
My system:
Antec twelve hundred
Asus striker 2 extreme
Core2Quad Q9550 (Scythe "infinity/mugen" cooler)
1x XFX 9800 GTX+
Corsair 2x2GB DDR3 PC12800 CL 9.0 XMS3
HD: 1x 150GB Velicop Raptor
1x 1TB Samsung
OS: Windows vista ultimate (64bit)