Page 2 - Discuss Frequency is out of range in the Computer Monitors forum on Dev Hardware. Frequency is out of range Computer Monitors forum for discussing display products from Samsung, Sony, Sharp, Toshiba, NEC, Dell and ViewSonic. Find help and information about high resolutions and refresh rates, VGA and DVI connectors, and using dual monitors.
ASP Free and Iron Speed Designer are giving away $5,500+ in FREE licenses. Iron Speed's RAD CASE toolset can save up to 80% of your coding time. One free license per week, one perpetual license per month!
Receive the tools necessary to be the rock star of your field. Our 12-month program teaches you the evolving world of multi-channel marketing as well as the complex issues and opportunities found in the industry.
The ASP Free website provides in-depth information on the latest developer tools available from Microsoft. Our cadre of writers, highly experienced industry experts, reveals the best ways to use established technologies as well as new and emerging technologies. Our coverage of Microsoft's development and administration technologies is among the most respected in the IT industry today. .
Posts: 1
Time spent in forums: 16 m 6 sec
Reputation Power: 0
Same with Sims 2 Nightlife
I have the same problem as the person with the Vampire game except it only shows the out of frequency page when I put objects into a lot. It's been driving me crazy for days so I'd like to know where to go to install plug an play drivers. I can figure out where to get the drivers themselves, I just need help installing them.
Posts: 2
Time spent in forums: 3 sec
Reputation Power: 0
27k / 61 Hz
Quote:
Originally Posted by tonche
My problem is diffrent, when i start my computer automaticly it apears the warning that "Frequency is out of range 27K / 61HZ", i cant start my computer in safe mode becouse in sreen the warning apears automaticly when i start it. I have checked the monitor in one other comuter it works. I tryed to change RAM memory and HDD, but the problem still conntinues. Can someone help me
Just wanted to know if the problem solved and how ? I am encountering the same. the KB is being disabled and cannot do anything. Looking forward to your advise.
Posts: 2
Time spent in forums: 3 sec
Reputation Power: 0
Hv your problem solved and how to overcome it ? I've the same problem as you. pls hel
Hv your problem solved and how to overcome it ? I've the same problem as you. pls help
Quote:
Originally Posted by tonche
My problem is diffrent, when i start my computer automaticly it apears the warning that "Frequency is out of range 27K / 61HZ", i cant start my computer in safe mode becouse in sreen the warning apears automaticly when i start it. I have checked the monitor in one other comuter it works. I tryed to change RAM memory and HDD, but the problem still conntinues. Can someone help me
Posts: 1
Time spent in forums: 5 m 43 sec
Reputation Power: 0
frequency out of range message RIGHT AFTER pressing the ON button/turning on comp
i had the same problem as
tonche
jambazijangili, and
BOBG
and i sort of solved it...
i had ur problems too... no chances of even trying to press F8 and going to safe mode right?
i'm not gonna go all techy coz i know almost nothing on computers.. but this is what happened...
one day.. after a sunny day.. i tried to turn on the comp.. then the bloody message appeared... "frequency.. yada yada.."
tried to find the fixer for the problem on the net but nobody had the answer... did the same thing normal ppl would do.. plugged in other monitors... both lcd and crt... same problem... "not optimum resolution" or "frequency out of range"
tried the monitors on other CPU's... worked fine...
bought new video card.. couldn't install it because apparently.. i needed to disable the on board vid card first.. which i can't do coz it won't turn on...
i was boiling mad... eh... then my mom came into the room...
like all mothers.. although they don't know nothing.. they try to help the way they can... my mom... "cleaned" the motherboard with cotton and a toothbrush... asked me where the monitor was plugged.. and pulled out dust thicker than mold on bread from the area where the vid card was soldered...
then for some reason... after she cleaned it... i turned the comp on... still got the message.. but this time.. the CPU was beeping thrice...
searched on the net what it means.. apparently, it means there is an error.. physically.. on the RAM... likely not connected properly... so.. although it seemed connected perfectly... i took it out.. and pressed it in real nice and tight.. the properly locked it in place...
in all the blessings... when i plugged the monitor back in the onboard vid card... i heard the sounding glory of that one short beep from the CPU... signalling a success in booting.. and the dreaded "frequency out of range" message was never seen again... so far...
so there... i reckin the problem solver was the fact that the connections and the motherboard was free from the suffocating dust... and/or... the connections that needed be connected properly was properly connected... i hope this very long short story of a day in my life will help you guys and some other people who my have the problem too...
peace.. no flamming.. i really am a noob at these stuffs and thought you guys might want to know how mine worked.. in a very subjective way take care now..
Posts: 3
Time spent in forums: 46 m
Reputation Power: 0
frequency out of range message RIGHT AFTER pressing the ON button/turning on comp
i encounter this problem too if any one encounter this problem will i have solution.
first thing i clean the board blower it and unplug the memory brush the memory slot and clean the memory with your clothes on the bottom side and plug it again just do it again and again until the error will gone i have brush my memory slot 3 times before the error is gone hope it works on your computer two
Location: Centrally located in the middle of nowhere, CA
Posts: 9,250
Time spent in forums: 10 Months 3 Weeks 2 Days 14 h 2 m 52 sec
Reputation Power: 17383
Quote:
Originally Posted by comtechsupport
i encounter this problem too if any one encounter this problem will i have solution.
first thing i clean the board blower it and unplug the memory brush the memory slot and clean the memory with your clothes on the bottom side and plug it again just do it again and again until the error will gone i have brush my memory slot 3 times before the error is gone hope it works on your computer two
That's a good way to blast your memory with static electricity; don't do that!
This thread was started six and a half years ago, the original players are long dead and gone; please don't resurrect ancient threads.
"In front of a monitor is a dangerous place from which to view the world." --Terri Wells
Enable BSOD: Control Panel/Systems, Advanced Tab, hit the Settings button under Startup and Recovery, and under the System Failure area, uncheck the Automatically Restart checkbox.
Posts: 2
Time spent in forums: 20 m 37 sec
Reputation Power: 0
Quote:
Originally Posted by Techsavvy7
Whenever i try to start my computer i get a small rectangular blue screen with a red band prompting me that frequency is out of range.I see two things the hf range 63khz and vf 60hz and the appropriate range is mentioned below as
hf:30-54khz
vf:30-90hz
my hf range has exceeded the limit somehow and i just can't understand how to bring it back to the optimum range.
I have 2 operating systems installed on
my computer.I am able to start win 2000 but not win 98 because i get the blue screen saying out of frequency message.I tried to go to the safe mode but it would not let me since it gives me the same message over and over again.
Even i am facing the exact issue and have 2 operating systems installed on
my computer.I am able to start win 2000 but not win 98 because i get the blue screen saying out of frequency message.I tried to go to the safe mode but it would not let me since it gives me the same message over and over again.
ok uh go to boot and put your computer in safe mode then restore it
Posts: 2
Time spent in forums: 20 m 37 sec
Reputation Power: 0
frequent out of range
go to boot and click safe mode then restore your computer and thats what i did cuz it happened to me today because i changed my display settings to high/small
LOADING INFUSIONSOFTLOADING INFUSIONSOFT 1debug:overlay status: OFF overlay not displayed
overlay cookie defined: TI_CAMPAIGN_1012_D
OVERLAY COOKIE set:
status off
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Same with Sims 2 Nightlife
Hv your problem solved and how to overcome it ? I've the same problem as you. pls hel
frequency out of range message RIGHT AFTER pressing the ON button/turning on comp
take care now..
Linear Mode
