|
|||||||||
|
|||||||||
|
|||||||||
 |
|||||||||
| |
||
|
|
|
|
|||||||||
|
|||||||||
|
|||||||||
|
|||||||||
| |
||
|
|
|
| |||||||||
 |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Display Modes |
Dev Hardware Forums Sponsor:
|
|
|
November 3rd, 2004, 03:31 PM
|
||||
|
||||
|
come here for mod ideas
Loads of people have been posting in the case gallery asking for ideas and we all know what the case gallery "showing off your MODDED case" is for so here are a few ideas
----Laptop Mods---- LapTop mod #1 ----Painting Mods---- painting inside the case Case Painting 101 ----Case Mods---- Cheap As Free Air Cooling Mod Build your own printer cable LCD Display 6" Lcd mod Adding case handles tidying up your case carpet your case adding a blowhole lian li bezel mod front switch bay under case lighting LED Flame Fan drive stealthing rounding your ide cables molex lights pci cooler Fanless W/C System --------Window Mods------- hardcore hard drive window hard drive window cd rom window side window ----UV Mods---- parts ----Peripheral Mods---- el wire keyboard mod painting your mouse add a window to your mouse putting a fan in your mouse ----------Links to other case galleries------------ Check out this post...good links More Galleries in this post Keep all the modding ideas coming!  Last edited by ½îñ§ÅÑΣ : November 2nd, 2005 at 09:46 AM. Reason: Thread Updated!
|
|
November 24th, 2004, 10:12 PM
|
||||
|
||||
|
Carpet the inside of the case:
benefits: Makes the PC run quieter. Looks pretty freaking cool. Supplies: run of the mill speaker box carpet Scissors super glue ruler Step one: Measure and cut the peices out to fit the certain areas you would like to carpet Step Two: Glue the cut out peices in place with the super glue Step Three: Let everything dry and the case to sit for an hour so the fumes from the super glue dont fog up your plexi windows(if one is present) Step Four: Enjoy your new carpeted case.
|
|
November 29th, 2004, 04:35 PM
|
||||
|
||||
|
tidying case wires
link i also wanted to add i did a minor mod i cut holes to route the wires behind my mobo tray theres an pic
__________________
 Wired on Pro Plus and Coca Cola my flashy sig
  
|
|
December 5th, 2004, 08:36 AM
|
||||
|
||||
|
One thing I hate is an odd looking led.
Cd, Floppy, Case: http://www.gideontech.com/guides/led_replace/ Also cheap leds: http://cgi.ebay.co.uk/ws/eBayISAPI....me=STRK:MEWA:IT Last edited by pandaking : December 6th, 2004 at 10:19 AM.
|
|
December 8th, 2004, 05:25 PM
|
||||
|
||||
|
adding case handles
those of you who are always moveing your case (like me) know how annoying it is wen u haven't got anything to hold on to well i this mod where gunna stick some handles on your case
1. the parts D pull handles hacksaw drill washers  2. take the case apart i had to drill rivets out of mine on a earlyer mod  3. measure it up i got a bit of card but it in the gap lined the handle up and marked it then i periced it with a screwdriver therefore i had the spaceing perfect  4. once you have drilled the holes (make sure u drill form the inside out because if u slip no huge scratch) screw them on  5. make sure there nice and tight  6. put you case back together sit back and look at your handy work  this mod cost me about 3 pounds and took about 40 mins  Last edited by ohara : December 8th, 2004 at 05:29 PM.
|
|
December 12th, 2004, 09:52 AM
|
||||
|
||||
|
what like this
 or this 
|
|
December 28th, 2004, 03:36 AM
|
||||
|
||||
|
Quote:
Is all you want to do is add a case fan in it? If so... 1. use masking tape on both sides of the plexi (stops the plexi from splitting/chipping and protects against the erroneous blade slip up). 2. Draw out the cut location 3. If using a jigsaw, drill a pilot hole first 4. if using a dremel, start by making cuts like slicing a pizza across the cut out. I usually make 4 cuts like that. 5. then slowly make the round cuts, taking out a "slice of the pizza" at a time. 6. sand down all the rough edges 7. line up the fan, and outline the holes for the fan mounting screws. 8. drill out the holes...depending on how thick the plexi is, you might want to start out with a small bit, then work your way up the desired size. 9. remove the tape, and clean up any remaining residue 10. install the fan. peace
__________________
FOLD for DevFolding Team 12912, Click HERE To find out how.
|
|
January 6th, 2005, 12:57 PM
|
|||
|
|||
|
I have another, cheaper LCD mod, i found this when searching for a multi LED temperature meter circuit diagram. (reference for electronics coursework (electronics n00b))
http://www.overclockers.com.au/techstuff/a_diy_lcd/ i will probably at some point do this mod, it looks fun and cheap \m/, might cut up one of my plastic drive bays and fit it in there.
__________________
|
|
January 23rd, 2005, 03:33 PM
|
||||
|
||||
hey look what i found, a brilitant way to duct hot air off your CPU, NB, and other bits straight out the case:
http://www.overclockers.com/tips1187/index02.asp
|
|
January 24th, 2005, 06:54 PM
|
||||
|
||||
|
i have just finished tydying my wire and my cpu temps dropped down 8c's .
i did a little mod.i tooked off those little pci slot covers and putted a fan to pull air out for my video card and now it's less hot. i got some pics of my comp and of my little mod.
|
|
Trader Rating: 0
·
# |
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
