|
|||||||||
|
|||||||||
|
|||||||||
 |
|||||||||
| |
||
|
|
|
|
|||||||||
|
|||||||||
|
|||||||||
|
|||||||||
| |
||
|
|
|
| |||||||||
 |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Display Modes |
Dev Hardware Forums Sponsor:
|
|
|
July 3rd, 2008, 07:11 PM
|
|||
|
|||
|
Antec 900 problems
just got my antec 900 case and assembled it and everything is fine except the 200mm fan kept making a clicking noise. i turned it off and manually spun the fan and it turns out a part of the fan is just grazing the case, making the clicking sound. how do i fix this!!!
|
|
July 3rd, 2008, 11:26 PM
|
||||
|
||||
|
Fan problem
 Just let run it will ware off that spot and not be a problem. Or take a box cutter and trim just a little off the blade where it hits.
|
|
July 14th, 2008, 04:30 PM
|
||||
|
||||
|
if it is hitting an LED, just push teh led back a bit. i had a similar problem on one of the 120mm fans they ship with.
otherwise you could lightly sand down the casing with some sandpaper, unless it is just one fan blade which is ever of so slightly longer than the rest. this doesnt usually happen, so i'd check to see if the fan is not warping and not cracked. if it is, it would explain the blades touching the sides - which should not happen.
__________________
One Arrow, One Click, Version 1.10 Rig Info and Links To Guides
|
|
September 7th, 2008, 10:47 AM
|
|||
|
|||
|
I pressed the reset button on my antec 900 too much and it wont come out. Has anyone else had this problem? Is it possible to remove the top panel?
|
|
| Viewing: Dev Hardware Forums > HARDWARE > Computer Cases > Antec 900 problems |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
|
 |
|
|
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Linear Mode
